redman1118

What's the easiest way to get the valve cover off the cyl head to replace the gasket as I'm told the cover is epoxied on? What's the best epoxy to use to reattach the valve cover to the cyl head?

That was a quick fix! Too impatient . had to wait for the system to stabilize as I'd been without heat for a month with no garage to work on the car . and so it goes

never mind ... I have heat

Hi Just replaced the leaking heater core on my '95 camry le (w/2.2 mtr) after the heater, with the fan turned on spewed steam out the dash vents. Now no leaks, overheating, or steam out the dash vents :) but, no heat? what'd I miss pls?

What year is your Camry? sorry, it was in the post title and I should have put it again in the text ..... '95 2.2 dl

Just replaced the alternator on a 2.2 DL + had to replace the main blue fuse. Now the srs idiot light's on but car drives fine and battery now charges correctly. How do I reset the srs dash light assuming I didn't trip a fault code in the work I did. How do I check for fault codes?

too many hands helping jump start a car. Jumper cables got reversed and now the dead car, when turning the key to start only show's the dash battery icon. Assume I either blew a main fuse or fried a fusible link but no info in owners manual. Where am I looking please thx

Replacing heater core but didn't come with instructions on how to disengage tube connector clamps between the heater control valve and heater core inlet tubes. I don't want to damage anything. Heater core's just held in it appears with 2 bolts after the clamps are removed between the heater core and heater control valve; correct? How do I remove the tube clamps to pull the heater core out please? thanks

found heater core issue, wet at tube entry into heater core. Have new heater core but didn't come with instructions on how to disengage tube connector clamps between the heater control valve and heater core inlet tubes. I don't want to damage anything but the heater core's just held in it appears with 2 bolts; correct? How do I remove the tube clamps to pull the heater core out please? thanks

Hi '95 2.2 / auto/ dl sedan No leaks/carpet wetness or anti freeze smell but turning on the heater spew's steam from passenger side defrost and dash vents. Heater control valve and hoses all ok. A/C works fine when warm but on warmup steam from both heater and a/c modes. Heater core? or what am I looking for. thanks

? on the front hydraulic mount style. Top bolt is there; engine raising on acceleration test; is the top mount bolt a "through bolt" and can be replaced or does it thread into a sleeve that's supposed to be secured to the rubber mount. If it threads into a sleeve can the sleeve be epoxied "or whatever" to reattach the sleeve to the mount rubber securely to repair it. If the bolt is a through bolt can it be replaced with a grade 5 bolt? New Mount cost's $71 I'm told by parts stores thanks

How does the dome light cover come off to replace the bulb. Dealer said it was a press fit ......not ..... it has springs or clamps holding it into the ceiling thx

got it, thank you ........ I'll let ya know how it went