Some minor electrical features stopped working after replacing a driver's side sun visor on a 2010 Toyota Camry Hybrid w. sunroof and light

[Crosby]

Bottomline: 

>The interior lights, 

>lighted clock on the dashboard, and

> the black button on the exterior door handle for keyless locking/unlocking

All stopped working after I did a DIY replacement of the driver's side, left, sun visor

I replaced the Sun Visor (left driver's side) for my 2010 Camry Hybrid with a light and a sunroof.  I used a lousy Youtube video on how to do it..  I made a simple decision that turns out to be a poor one.  I removed the old plug with black metal clips from the space in the ceiling with no problem.  How there was a white plastic prong type piece in place  with flat plastic coated wires on each side. 

The new visor had a similar white plastic prong type piece that would replace the old one.  I did not realize I could take out the new white plastic piece and leave the old one in place and simply push the black metal clips on the new visor into the ceiling slot.  

flat wires on both sides, thinking that it would simply only stop the console light over the visor.  I simply put the new visor with black metal clips and the new white plastic prong piece in place in the slot in the ceiling. 

 

As mentioned

>The interior lights, 

>lighted clock on the dashboard, and

> the black button on the exterior door handle for keyless locking/unlocking

All stopped working

Can this be fixed?  Did I blow an electrical fuse?? Or did I break a series electrical circuit?  PLEASE ADVISE!