cherrmj Posted February 6, 2020 Share Posted February 6, 2020 (edited) Hello, I have a puzzle, for me. How do remove the 30 Amp square fuse under the dash? See Attached. . And... Anyone splice the ten wire harness to the Power Steering switch? My Power Seat forward/back function stopped working awhile back but other switches worked. It would Only move forward. I accessed the switch and ten wire plug and wrapped a rubber-band to hold the switch in the back position. I then jumped the two wires and was able to move the seat back to a position that all drivers could use. A few months later a driver forgot, and moved the seat forward. Now difficult for me. I then tried jumping the wires again but this time generated a spark and one of the wires burned some.. I think I used to small of a Gage jump wire. Now, No functions work. I went to the JY and pulled the same switch and plug with about six inches of extra wire. How do I remove the 30 AMP fuse under the dash? Trick? Tool? Anyone have experience splicing the ten wire harness to the Power Steering switch? Thank you for any advice!!! Edited February 9, 2020 by cherrmj Corrected picture Quote Link to comment Share on other sites More sharing options...
cherrmj Posted February 10, 2020 Author Share Posted February 10, 2020 Hello, Anyone with experience removing this 30AMP fuse? Difficult for me to get two fingers on it. This is the fuse box to the left of the steering wheel under the change drawer. Any specific step by step directions? Thank you for your help Quote Link to comment Share on other sites More sharing options...
SkydawgCrashed Posted February 10, 2020 Share Posted February 10, 2020 Get a pair of long nose pliers at the auto store. Open them wide and clamp down on the sides where you would pull. Wiggle back and forth, should come out? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.