Jump to content

Fred

Regular Member
  • Posts

    5
  • Joined

  • Last visited

Profile Information

  • Toyota Model*
    2005 tacoma

Fred's Achievements

Member

Member (1/14)

0

Reputation

  1. I am going to answer my own question! I found these programming instructions on Toyota Nation and they work perfectly. I have a 2005 Tacoma Dbl Cab Longbed with the upgraded alarm from Toyota. The vehicle should meet the following conditions before proceeding: *The key is NOT in the ignition *Driver’s door is OPEN (The others are CLOSED) *Drivers door UNLOCKED (Not necessary for Echo) 1) INSERT and REMOVE the key from the ignition cylinder, TWICE within 5 seconds 2) CLOSE and OPEN the driver’s door TWICE within 40 seconds 3) INSERT and REMOVE the key into the ignition cylinder 4) CLOSE and OPEN the driver’s door TWICE within 40 seconds 5) INSERT the key in the ignition and CLOSE the driver’s door 6) Turn the ignition switch from LOCK to ON and back to LOCK at approx. 1 sec. Intervals “ 2” times to enter REWRITE MODE 7) REMOVE the key from the ignition (The door locks are cycled LOCK-UNLOCK within 3 seconds TWICE to let you know that you have selected REWRITE MODE) 8) Within 40 seconds press BOTH the LOCK & UNLOCK buttons on the transmitter simultaneously for 1 second (Press and release). 9) Within 3 seconds press and release the LOCK button on the same transmitter (The door locks will cycle ONCE if the transmitter was recognized and TWICE if it was not recognized {if you get two cycles start over}). 10) Within 40 seconds repeat step 8 and 9 with any other transmitters you wish to program 11) One of the following will END the Rewrite mode; *40 seconds elapses *Drivers door is opened *Key inserted into the ignition cylinder *4 transmitters are registered Step #6 Options: *1 time it's for add mode *2 times for rewrite mode *3 times for confirmation mode Fred
  2. Does anyone know how to program the remote for the keyless entry system of a 2005 Tacoma? The book that came with the truck does not say. Thanks! Fred
  3. There is no control unit under the seats. Does anyone know how to add or delete remotes to a 2005 Tacoma? It uses the same remote as the Sienna.
  4. My local Toyota parts guy told me there is no cabin air filter for the 05 Tacoma. If you look behind the glove box there is a hinged door that looks like a place for one. I wonder if a cabin air filter from another model would fit. Has anyone tried this? Fred
  5. Where is the Main Control Box for the keyless entry system. The programming button is on this unit and I cannot find it. Thanks Fred
×
×
  • Create New...

Forums


News


Membership