Tommy

Need help! I just purchased my new 2006 Tacoma Access cab. I have ordered lighted factory sytle running boards which should be hooked into the dome lamp circuit. The dome lamp has three wires in the harness. One white wire which is fed from the engine fuse box (fuse #22), a blue wire which runs to the ECU-B, and one white /Grey which I believe runs to the door switch circuit. The white wire seems to have power all the time at the dome lamp when using a test light. I need to find the wire to allow me to hook to the dome lamp, which would allow the running board lights to come on when the doors are opened, or when the unlock is pressed on the remote. The lights should also fade out when the dome light does. Please email me with any details that you might have. (tsravelli@gogebic.cc.mi.us) Excuse the spelling in the title, fingers weren't working well this morning!! Thanks Tommy

I need help. I just purchased a 2006 Toyota Tacoma and have ordered a set of lighted running boards. The lights are to be tied into the dome lamp circuit. I need to know which wire to tap into and where the best spot to find the wire would be. The dome lamp has three wires.......one white which brings power to the dome lamp from the engine fuse box. the second is blue and it feeds back to the ECU, and the third a grey wire looks like it feed back to the door switches. The door switches have a greenw/yellow strip coming from them and they ground to make the dome light work, when the button is released. I check some of the wires in the left tray under the step plate, but could not find one that had power for the dome light. The fused circuit is fuse #22 in the engine fuse box. Thanks Tommy <_<